|
Product Details:
|
| Application: | Coating | Color: | White |
|---|---|---|---|
| Density: | 0.99(g/cc) | Product Form: | Powder |
| Product Name: | Powder Coating Additives | Product Type: | Additives |
| Storage Conditions: | Dry | Toxicity: | None |
| Highlight: | Adhesion Powder Coating Additives,Metal Bonding Powder Coating Additives,Agglomeration Powder Coating Additives |
||
Metal Bonding Additives Powder Coating Additives Prevent Adhesion and Agglomeration, Improve Mirror Effect
Product:Metal bonding agent
Model:HD-816
Composition:Micropowder modified polymer homopolymer
Technical Parameter :
| characteristic | parameter |
| Appearance | white powder |
| Particle size | 3μm (D50) |
| Melting point | 145℃ |
| Density | 0.99(g/cc ) |
| Volatile matter | ≤1% |
| system | features |
| HD-816 is a special additive added to metal powder bonding, suitable for different systems of metal effect powder coatings. | Prevent the adhesion and agglomeration of powder particles during the bonding process |
| Increase bonding temperature and improve bonding effect of metal coatings | |
| Reduce the amount of metal pigments required for metal effect powder coatings | |
| Improving the heat and salt spray resistance of coatings |
Addition amount and usage method:
1.The addition amount of metal bonding additives for HD-816 is generally 0.2-1.5%
2.Using heating bonding equipment, add HD-816 and the base powder together into a hot mixing cylinder, stir and raise the temperature to about 65 ℃. Slowly stir and add metal pigment powder, control the temperature for 10-25 minutes. Place the material in a cold mixing cylinder, stir slowly, and quickly cool the powder to below 35 ℃. Add flow additives, and place the material through a sieve.
Product packaging: 15kg/pack 20kg/pack (lined with polyethylene bag)
Storage:It should be stored in a clean, ventilated, and dry warehouse to avoid impurities mixing in
Notes:The conditions and ratios listed in this manual are for reference only. It is recommended that users make appropriate adjustments based on specific equipment, materials, environment, and application conditions before use.
Contact Person: Mr. Brian
Tel: +86 13827286370
Fax: 86--21662926
